# OpenStack plugin OpenStack plugin ================ OpenStack is an Infrastructure as a Service (IaaS) cloud computing project by Rackspace Cloud and NASA. It is free, open-source software released under the terms of the Apache License. The mission of the OpenStack project is to enable any organization to create and offer cloud computing services running on standard hardware. The community’s first official release, code-named Austin, was made available just four months later with plans to release regular updates of the software every few months. OpenStack integrates code from NASA’s Nebula platform as well as Rackspace’s Cloud Files platform. The OpenStack plugin allows you to build a cloud by launching images and assigning metadata to instances, providing a more generic interface for managing resources. It interacts with OpenStack through the Compute API and Image API using PERL to perform the following tasks: * Create configurations with the connection information. * Perform actions on machines. * Deploy and delete servers. * Create and delete key pairs. * Create and delete floating IPs. * Create CloudBees CD/RO resources. * Create, attach, detach, extend, and delete volumes. * Create new images. * Create a snapshot of a server. * Perform hard and soft reboots of a server. * Deploy, update, and delete HEAT orchestration templates. The OpenStack plugin provides two primary actions: **Deploy** and **Cleanup**, which work as a pair within a job. [](#_prerequisites)Prerequisites -------------------------------- This plugin uses an updated version of Perl, cb-perl shell (Perl v5.32), and requires CloudBees CD/RO agents version 10.3+ to work. Plugin Version 1.3.7.2022041801 Revised on April 14, 2022 [](#_supported_versions)Supported versions ------------------------------------------ This plugin was developed and tested against OpenStack IceHouse. The minimum CloudBees CD/RO supported version is ElectricCommander 3.6. [](#setupconfig)Create OpenStack plugin configurations ------------------------------------------------------ Plugin configurations are sets of parameters that can be applied across some, or all, plugin procedures. They can reduce the repetition of common values, create predefined parameter sets, and securely store credentials. Each configuration is given a unique name that is entered in the designated parameter for the plugin procedures that use them. The following steps illustrate how to create a plugin configuration that can be used by one or more plugin procedures. The **Identity Service URL** must have `http` or `https`, followed by your server hostname or IP address. To create a plugin configuration: 1. Navigate to **DevOps Essentials**  **Plugin Management**  **Plugin configurations**. 2. Select **Add plugin configuration** to create a new configuration. 3. In the **New Configuration** window, specify a **Name** for the configuration. 4. Select the **Project** that the configuration belongs to. 5. Optionally, add a **Description** for the configuration. 6. Select the appropriate **Plugin** for the configuration. 7. Configure the plugin configuration parameters. 8. Select **OK**. Depending on your plugin configuration and how you run procedures, the **Input parameters**  **Configuration name** field may behave differently in the CloudBees CD/RO UI. For more information, refer to [Differences in plugin UI behavior](/docs/cloudbees-cd-plugin-docs/latest/#plugin-ui-differences). [](#procedures)Create OpenStack plugin procedures ------------------------------------------------- Plugin procedures can be used in [procedure steps](/docs/cloudbees-cd/latest/procedures/), [process steps](/docs/cloudbees-cd/latest/applications-processes/plugin-process-steps), and [pipeline tasks](/docs/cloudbees-cd/latest/pipelines/example-plugin-task), allowing you to orchestrate third-party tools at the appropriate time in your component, application process, or pipeline. Depending on your plugin configuration and how you run procedures, the **Input parameters**  **Configuration name** field may behave differently in the CloudBees CD/RO UI. For more information, refer to [Differences in plugin UI behavior](/docs/cloudbees-cd-plugin-docs/latest/#plugin-ui-differences). ### [](#_allocateip)AllocateIP Creates a new OpenStack floating IP address to use with your OpenStack account. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_allocateip_input_parameters)AllocateIP input parameters Table 1. AllocateIP input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Results Location The location in the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from the other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#_associatefloatingip)AssociateFloatingIP Associates a floating IP address to an existing instance. #### [](#_associatefloatingip_input_parameters)AssociateFloatingIP input parameters Table 2. AssociateFloatingIP input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Server Id Required. The ID of the target server with the IP address. ### [](#_attachvolume)AttachVolume Attaches volumes that are created with the volume API to server instances. You can attach a volume to one instance. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_attachvolume_input_parameters)AttachVolume input parameters Table 3. AttachVolume input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Server ID Required. ID of the server to which the volume is attached. Volume ID Required. ID of the volume to attach. Name of device Name of the device, such as `/dev/vdb`, set after the volume is attached to a server. If you do not specify a name, OpenStack automatically assigns the device a name. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#Cleanup)Cleanup Deletes an existing OpenStack server instance that was created using the [Deploy](#Deploy) procedure. #### [](#_cleanup_input_parameters)Cleanup input parameters Table 4. Cleanup input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Server ID(s) Required. Comma-separated list of IDs of servers to delete. Resource name(s) Comma-separated list of names of the resources to delete. ### [](#CloudManagerGrow)CloudManagerGrow Allows the plugin to integrate with the CloudManager plugin. It calls the [Deploy](#Deploy) procedure and is run by CloudManager. #### [](#_cloudmanagergrow_input_parameters)CloudManagerGrow input parameters Table 5. CloudManagerGrow input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Tenant ID Required. The ID of the tenant to use. Number of Servers Required. The number of servers to deploy. If there are more than one, a suffix (`_#`) is added to the server names. The default is `1`. Server name Required. Name of the new server. Image ID Required. The ID of an existing image in OpenStack. Flavor ID Required. The ID for the flavor to use. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. Resource Pool(s) Required. Space-separated list of names of resource pools in CloudBees CD/RO that are associated with the machines in this configuration, if the resources are created. Resource workspace The CloudBees CD/RO workspace that the resource uses. ### [](#CloudManagerShrink)CloudManagerShrink Allows the plugin to integrate with the CloudManager plugin. It calls the [Cleanup](#Cleanup) procedure and is run by CloudManager. #### [](#_cloudmanagershrink_input_parameters)CloudManagerShrink input parameters Table 6. CloudManagerShrink input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. List of Deployments Required. A list of deployments that were previously created by the CloudManagerGrow procedure to stop. ### [](#CloudManagerSync)CloudManagerSync Allows the plugin to integrate with CloudManager plugin. It verifies that the instances it has recorded as **alive** are still alive. It is run by CloudManager. #### [](#_cloudmanagersync_input_parameters)CloudManagerSync input parameters Table 7. CloudManagerSync input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. List of Deployments Required. A list of deployments that were previously created by the CloudManagerGrow procedure to verify. ### [](#CreateImage)CreateImage Creates a virtual machine (VM) image. You can launch new instances from these images. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_createimage_input_parameters)CreateImage input parameters Table 8. CreateImage input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Image name Required. Display name of the new image. Disk format Required. The disk format of a VM image. Valid values are `AKI`, `AMI`, `ARI`, `Raw`, `iso`, `vhd`, `vdi`, `qcow2`, and `vmdk`. Container format Required. The container format for the new image. Valid values are `aki`, `ari`, `ami`, `bare`, and `ovf`. Is image location a local file ? Required. If selected, the source image file is on the local machine. Image path Required. Path to the image on the local machine or a valid and direct URL to the image location. Size Size of the raw image file from which the new image is generated. Checksum The checksum of the raw image file. Min-Ram The minimum RAM in megabytes (MBs) required to run this image on a server. Min-Disk The minimum disk space in gigabytes (GBs) required to run this image on a server. Owner The ID of the owner (tenant) of the image. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#CreateInstanceSnapshot)CreateInstanceSnapshot Creates a snapshot from the instance. You can launch an instance from a snapshot. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_createinstancesnapshot_input_parameters)CreateInstanceSnapshot input parameters Table 9. CreateInstanceSnapshot input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Instance snapshot name Required. The display name of the snapshot. Server ID Required. The ID of the server instance for which a snapshot is created. Metadata Metadata for the snapshot in the following format: `key1,value1,key2,value2…​` Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#CreateKeyPair)CreateKeyPair Creates a new OpenStack key pair. The public key is stored by OpenStack and the private key is returned to you. If a key with the specified name already exists, OpenStack returns an error. The plugin stores properties on the CloudBees CD/RO server in the location specified in the **Results Location** and the **Results tag** fields. If the **Results Location** field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_createkeypair_input_parameters)CreateKeyPair input parameters Table 10. CreateKeyPair input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Key name Required. A unique name for the key pair. The default is `cmdr-$[jobStepId]`. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#CreateStack)CreateStack HEAT is an OpenStack service to orchestrate multiple composite cloud applications using templates. The **CreateStack** procedure creates a new HEAT stack from a specified HEAT template. You can specify the template (in JSON or YAML format) in the **Template** parameter field or the URL of the template. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_createstack_input_parameters)CreateStack input parameters Table 11. CreateStack input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Stack Name Required. The display name for the new stack. Template The stack template to instantiate a HEAT stack in JSON or YAML format. Template URL A URI to the location containing the updated stack template to instantiate. You specify this parameter only if you are not entering the template in the **Template** parameter. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#CreateVolume)CreateVolume Creates a new OpenStack volume. A volume is a detachable block storage device. You can attach a volume to one instance at a time. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_createvolume_input_parameters)CreateVolume input parameters Table 12. CreateVolume input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Volume name Required. The name for the new volume that appears in the UI. Size (in gigabytes \[GBs\]) Required. Size of the volume in gigabytes. Type of volume Required. The volume type. Availability zone The availability zone where the new zone is created. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from the other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#CreateVolumeSnapshot)CreateVolumeSnapshot Creates a snapshot of a volume, a point-in-time complete copy of the volume. You can create a volume from this snapshot. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_createvolumesnapshot_input_parameters)CreateVolumeSnapshot input parameters Table 13. CreateVolumeSnapshot input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Name of volume snapshot Required. The display name of the snapshot. Description The description of the snapshot. Create a snapshot forcefully? If selected, a snapshot of a volume is forcefully created even if it is attached to an instance. Volume ID Required. The ID of the volume from which to create a snapshot. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#DeleteKeyPair)DeleteKeyPair Deletes an existing OpenStack key pair. The public key is removed from OpenStack. You must own the key pair. #### [](#_deletekeypair_input_parameters)DeleteKeyPair input parameters Table 14. DeleteKeyPair input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Key name Required. Name of the key pair to delete. ### [](#DeleteStack)DeleteStack Deletes an existing stack. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_deletestack_input_parameters)DeleteStack input parameters Table 15. DeleteStack input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Stack Name Required. The display name of the stack to delete. Stack ID Required. The ID of the stack to delete. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#DeleteVolume)DeleteVolume Deletes a volume. A volume is a detachable block storage device. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_deletevolume_input_parameters)DeleteVolume input parameters Table 16. DeleteVolume input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Volume ID Required. ID of the volume to delete. ### [](#Deploy)Deploy Calls the [CreateKeyPair](#CreateKeyPair) procedure and deploys one or more new instances. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_deploy_input_parameters)Deploy input parameters Table 17. Deploy input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Key Pair Name Required. Name of an existing key pair. Number of Servers Required. Number of servers to deploy. If there are more than one, a suffix (`_#`) is added to the server names. The default is `1`. Server name Required. Name of the new server. Image ID Required. ID of an existing image in OpenStack. Flavor ID Required. ID of the flavor to use. Security Group(s) Newline-delimited list of security groups. Availability Zone The availability zone in which to launch the server. Customization Script Configuration information or scripts to execute when the server is launched. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to keep it separate from the other deployments stored in the same location. The default is `$[jobStepId]`. Create Resource? If selected, resources are created for deployed servers. Associate IP? If selected,the IP address is associated with the deployed instance. Resource Pool Name of the resource pool in CloudBees CD/RO that is associated with the machines in this configuration when resources are created. Resource Port Port is used when creating a resource. Resource workspace CloudBees CD/RO workspace that the resources uses. Resource Zone Name CloudBees CD/RO zone name for a resource. Used when creating a resource. ### [](#DetachVolume)DetachVolume This procedure detaches a volume from a server. A volume is a detachable block storage device. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_detachvolume_input_parameters)DetachVolume input parameters Table 18. DetachVolume input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Server ID Required. ID of the server from which the volume is detached. Volume ID Required. ID of the volume to detach. Attachment ID Required. ID of the volume attachment. ### [](#ExtendVolume)ExtendVolume Extends the size of the specified volume. The volume must be in _available state_ before the size is extended. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. You must verify that the **ExtendVolume** procedure is supported by the OpenStack services before using this procedure. #### [](#_extendvolume_input_parameters)ExtendVolume input parameters Table 19. ExtendVolume input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Volume ID Required. ID of the volume to extend. New size Required. New size of the volume. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. ### [](#RebootInstance)RebootInstance Reboots a server instance. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_rebootinstance_input_parameters)RebootInstance input parameters Table 20. RebootInstance input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Server ID Required. ID of the server to reboot. Reboot Type Required. Type of the reboot action (`Hard` or `Soft`). ### [](#ReleaseIP)ReleaseIP Deletes an existing OpenStack floating IP address that is allocated to your account. #### [](#_releaseip_input_parameters)ReleaseIP input parameters Table 21. ReleaseIP input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Floating Address ID Required. ID of the floating IP address to delete. ### [](#Teardown)Teardown Deletes an existing OpenStack server. #### [](#_teardown_input_parameters)Teardown input parameters Table 22. Teardown input parameters Parameter Description Configuration The name of a valid existing configuration with the connection information. Resource name(s) Required. Comma-separated list of resource names to delete. ### [](#UpdateStack)UpdateStack Updates an existing stack. You can enter the updated template (in JSON or YAML format) in the **Template** field or the URL of the template. The plugin stores properties on the CloudBees CD/RO server in the locations specified in the **Results Location** and **Results tag** parameter fields. If the **Results Location** parameter field is empty, the default location in the job directory is `/myJob/Openstack/deployed/`. #### [](#_updatestack_input_parameters)UpdateStack input parameters Table 23. UpdateStack input parameters Parameter Description Configuration Required. The name of a valid existing configuration with the connection information. Stack Name Required. The display name of the stack to update. Stack ID Required. The ID of the stack to update. Template The template (in JSON or YAML format) with which to update the stack. Template URL A URI to the location containing the updated stack template to instantiate. You specify this parameter only if you are not entering the template in the **Template** field. Results Location The location on the CloudBees CD/RO server where the properties are stored. The default is `/myJob/OpenStack/deployed`. Results tag Required. The unique tag for this provision to separate it from other deployments stored in the same location. The default is `$[jobStepId]`. [](#_openstack_plugin_use_cases)OpenStack plugin use cases ---------------------------------------------------------- The most common use for the OpenStack plugin is to create a server, create CloudBees CD/RO resources assigned to it, use the resources to run some operations, and then delete the resource and the server. To accomplish these tasks you must: 1. [Create a plugin configuration](#setupconfig). 2. Use the [Deploy](#Deploy) procedure to deploy an OpenStack server. 3. Create and use resources for this deployment. For example, create a new Command procedure step to use a resource that you created by adding a resource from a resource pool using the ec-perl sleep command for 30 seconds. 4. Delete the resources. 5. Use the [Cleanup](#Cleanup) procedure to delete the deployed OpenStack server instance that you created with the [Deploy](#Deploy) procedure. 6. After the job runs, view the results in CloudBees CD/RO. ![Deploy output](../../../cloudbees-common-sda/latest/_images/cd-plugins/ec-openstack/use-cases/case-1/deploy-log.75a4f78.png) Figure 1. Deploy output ![Cleanup output](../../../cloudbees-common-sda/latest/_images/cd-plugins/ec-openstack/use-cases/case-1/cleanup-log.ed089b1.png) Figure 2. Cleanup output [](#rns)OpenStack plugin notes ------------------------------ ### [](#_1_3_7)1.3.7 * Added session validation. ### [](#_1_3_6)1.3.6 * The documentation has been migrated to the main documentation site. ### [](#_1_3_5)1.3.5 * The plugin icon has been updated. ### [](#_1_3_4)1.3.4 * Added Rackspace support for dynamic environments. * Configured the plugin to allow the CloudBees CD/RO UI to create configurations inline of a procedure form. * Configured the plugin to allow the CloudBees CD/RO UI to render the plugin procedure parameters entirely using the configured form XMLs. * Enabled the plugin for managing the plugin configurations inline when defining an application process step or a pipeline stage task. ### [](#_1_3_3)1.3.3 * Added support for the **Region** parameter to the **CreateVolume** procedure. ### [](#_1_3_2)1.3.2 * Added a **Resource Port** field to the dynamic environments. * Added support for the **Resource Port** parameter to the **Deploy** procedure ### [](#_1_3_1)1.3.1 * Fixed an issue with configurations being cached for Internet Explorer®. * Added validation to the **CreateConfiguration** procedure for dynamic environments. * Added the **Tenant ID** parameter to the OpenStack plugin configuration. * Removed the **Tenant ID** parameter from all procedures except **CreateConfiguration**. * Added the ability to dynamically retrieve drop-down options such as image or flavor when creating resource templates for dynamic environments. * Added the ability to create a resource in a non-default zone. ### [](#_1_2_1)1.2.1 * Fixed an issue that occurs when a resource was not created after provisioning it and the "Duplicate resource name" error message appears. * The **Workspace** parameter was removed from procedure to create an OpenStack configuration. ### [](#_1_2_0)1.2.0 * Added support for the following procedures: * **CreateVolume** to create a new volume. * **ExtendVolume** to extend the size of a volume. * **AttachVolume** to attach the volume to a server instance. * **DetachVolume** to detach the volume from a server instance. * **DeleteVolume** to delete a volume from OpenStack block storage. * **CreateImage** to create a virtual machine (VM) image on OpenStack Image Service Glance. * **CreateInstanceSnapshot** to create a snapshot of a server instance. * **CreateVolumeSnapshot** to create a snapshot of a volume. * **CreateStack** to create a HEAT stack from a HEAT template. * **UpdateStack** to update an existing HEAT stack with a template. * **DeleteStack** to delete an existing HEAT stack. * The **Deploy** procedure was updated to add support for customization scripts, availability zones, security groups, and deployments using an instance snapshot. ### [](#_1_1_2)1.1.2 * Added properties in the `ec_cloudprovisioning_plugin` property sheet for CloudBees CD/RO deploy. ### [](#_1_1_1)1.1.1 * Added support for Keystone v3 authorization. * Decoupled key pairs in creation and deletion operations from the **Deploy** and **Cleanup** procedures. * Added the **AssociateFloatingIP** procedure to associate floating IP addresses to existing VMs. * Fixed the **Create Resource?** parameter in the **Deploy** procedure. ### [](#_1_0_0)1.0.0 * Added support configuration management procedures. * Added support for the **AllocateIP**, **Cleanup**, **CreateKeyPair**, **DeleteKeyPair**, **Deploy**, and **ReleaseIP** procedures. * Implemented CloudManager support. * Implemented the XML parameter panel. * Added a documentation link to each procedure. * Added the documentation page. * Added use cases.